松套管非金属光缆12芯GYFTZY-12B1光缆*

松套管非金属光缆12芯GYFTZY-12B1光缆*

GYFTA光缆的结构是将250μm光纤套入高模量材料制成的松套管中，松套管内填充防水化合物。缆芯的中心是一根非金属加强芯（FRP），对于某些芯数的光缆来说，非金属加强芯外还需挤上一层聚乙烯（PE）。松套管（和填充绳）围绕中心加强芯绞合成紧凑和圆形的缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带（APL）纵包后挤制聚乙烯护套成缆。

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, the cable is completed with a PE sheath.

 松套管非金属光缆12芯GYFTZY-12B1光缆*

产品特点Characteristics

l   具有很好的机械性能和温度特性

    Good mechanical and temperature performance

l    松套管材料本身具有良好的耐水解性能和较高的强度

    High strength loose tube that is hydrolysis resistant

l     管内充以特种油膏，对光纤进行了关键性保护

    Special tube filling compound ensure a critical protection of fiber

l   特别设计的紧密的光缆结构，有效防止套管回缩

    Specially designed compact structure is good at preventing loose tubes from shrinking

l  PE护套具有很好的抗紫外辐射性能

    PE sheath protects cable from ultraviolet radiation

l     采用下列措施来确保光缆的防水性能：

    The following measures are taken to ensure the cable watertight:

   单根非金属中心加强芯

    Single Fiber Reinforced Plastic as the central strength member

   松套管内填充特种防水化合物

    Loose tube filling compound

   *缆芯填充

    cable core filling

   涂塑铝带（APL）防潮层

    APL moisture barrier

产品标准Standards

电缆集团有限公司GYFTA光缆符合YD/T 901-2001和IEC 60794-1标准

YOFC（TJ）GYFTA cable complies with Standard YD/T 901-2001 as well as IEC 60794-1.

非金属单模光缆GYFTZY-24b1架空引导光缆